Why does the water pump of spray vaporize

The vaporization phenomenon in the use of the spray water pump is mainly because part of the pressure in the pump body is lower than the steam saturation pressure of water. This phenomenon is not very good for its use, so it needs to be solved in time. To solve the problem, we need to understand the reason for this phenomenon first.

One of the main reasons for vaporization is that the installation height of the feed pump is too high, the vacuum degree at the suction buckle is increasing, and the pressure inside the pump is too low. On the one hand, the primary selection is a problem of design, and on the other hand, it is a problem in use. The design can be avoided when selecting and purchasing. If it is caused by improper use, it is necessary to learn how to use it.

Vaporization will also occur if the water inflow of the spray pump is insufficient. The whirlpool generated by the fast water inflow of the water pool will also cause the air to be sucked in at the inlet of the water pump, which will also cause the vaporization caused by insufficient flow and uneven pressure distribution at the inlet of the water pump. Basically, this problem can be solved by determining the water inflow.